Panel Construction Detail
Hoarding Panels can be constructed from a 9mm MDF or Plywood Skin (SK) fixed to a 70 x 35mm MGP10 Timber Frame.
Panel Frames are fixed with 2x 65mm 8G Chipboard Screws through Studs (ST) to Top & Bottom Plates (TP/BP).
Panel Skins (SK) are fixed to the Panel Frames using 35mm 10G Chipboard Screws as outlined in "Panel Type Hoarding - Panel Construction Detail".
| Panel Widths (PW) | Panel Heights (PH) |
| 1200mm (standard) | 3500mm |
| 900mm | 2900mm |
| 600mm | 2400mm |
| 300mm | 1200mm (kiosk hoardings) |
Panel Hoardings - Splay Panel Construction
Splay Panel construction is identical to normal Panel Construction, the only difference being the SK Overhang to allow for a flush corner connection.
Panel Hoardings - Door Head Construction
Door Heads are constructed from a 70 x 35mm MGP10 Timber Frame with a 9mm MDF or Plywood skin (SK).
Door Head Frames are fixed with 2x 65mm 8G Chipboard Screws through Studs (ST) to Top & Bottom Plates (TP/BP).
Door Heads will vary in height & width depending on:
- Height of the doors (DOH)
- Door Opening Width (DOW)
- Panel Height (PH)
(Door Head Height) = (Panel Height) - (Door Opening Height)
Door Heads are typically made into two separate smaller "Door Head" panels for ease of installation as detailed in "Panel Type Hoarding - Door Head Construction" .
Door Head On-Site Installation
Door Heads are fixed with 65mm 10G Chipboard Screws Top & Bottom of Door Heads through Hoarding Panel Studs (ST) as detailed in "Panel Type Hoarding - Door Head Construction" .